Forum Array

Acer :: Aspire 5672 WLMi Drivers

I'm trying to find the correct drivers for the above laptop. I found this thread How To's: Acer Aspire 5672 , but it seems some of the links no longer work. This system had XP Home originally and the HDD died. I installed a new HDD and want to install XP Pro, have disk, and do away with all the Acer stuff. I've already performed a clean install once before of XP Pro, but wasn't able to find the correct drivers for several pieces of hardware. I'm in the USA. Is there even an Acer USA? I can't seem to find the drivers at Acer. I have my original backup disk that I created using Acer erecovery and an XP pro install disk.

View Answers

Very Similar Questions

Acer :: Aspire 8730g-6353 Intel 5100 Wifi Link
www.notebookforums.com
i have just purchased a new acer aspire 8730g-6353 and for some reason i cannot connect to the internet wirelessly. i can see the networks available and attempt to connect, but i'm never given the chance to input the WEP key to connect. it gives me an error telling me my troubleshooting options (which just alludes to it being a problem with signal or some garbage like that, but there is 100% signal strength at any given time).

Acer :: Aspire 1410 Intel SU3500 With Online Flash Video And Multi-tasking
forum.notebookreview.com
I just made a purchase of a 1410 for about $340 with an Intel Core 2 Solo SU3500 and 2GB ram. I plan to do a clean of install Windows 7 32-bit once I receive the laptop. However one thing concerns me, how does the laptop fare with online Flash video streaming? I'm thinking it will do fine with 360p and 480p streaming, but is it able to run 720p or even 1080p smoothly? Also, is this model able to multi-task somewhat? I'm not looking for anything extreme, but I'm wondering more about running multiple tabs in a browser or running Office apps with internet surfing, etc. If not playable out of the box, are there tweaks to get HD flash playback smooth? I've heard of the new Adobe Flash 10.1 helping out with performance somewhat, but I'm wondering if it's a long wait before a cheap (sub-$400) netbook/sub-notebook can stream HD flash well that isn't an ION with Atom. I've heard great reviews on the 1410 and like the purchase, but was just curious about some of the performance situations stated above.

Acer :: Link To Download EPower Management/ PowerSmart Manager
forum.notebookreview.com
Anybody have link to download Acer ePower Management/Acer PowerSmart Manager for windows 7? I need it for my Acer Aspire 5935G.

Acer :: 1810T Installing Intel Wifi Link 5300's Third Antenna
forum.notebookreview.com
I want to replace my 1810T's Intel Wifi Link 5100 with an Intel Wifi Link 5300. The 5100 has two antenna connectors and so the 1810T has two antennas already installed in it. I purchased a third antenna, but I don't want to disassemble the screen to add the third antenna next to the two stock antennas. Can I just place the third antenna here (empty area next to mini PCIe slot):

Acer :: DXVA & MPC Video Quality On 1410/Intel 4500
forum.notebookreview.com
I've been encoding a lot of my DVDs to h264 using Handbrake for traveling, and I have my 1410 set up to do DXVA h264 decoding with Media Player Classic HC (on Windows 7 Pro RTM x64). I used this guide to set up DXVA: [url] The DXVA offloading works well, and I get around 5-10% CPU usage on Task Manager. My issue is that the video quality looks poor compared with using Windows Media Player 12. H264 MKVs look great on WMP, but sometimes they stutter a little, CPU usage is around 10-20%, so I know it's doing some kind of DXVA of its own. After reading this thread, I figured out my problem somewhat: Is there anyone that can play this H264 clip on Timeline SU3500 without 100% CPU load? What I wanted to know is this: has there been any development in fixing the h264 deblocking bug with MPC-HC and DXVA? I'd like to use MPC-HC for my MKV viewing, because that plays video the smoothest, and it handles the audio and subtitles of several anime series that I have. Just some background on my setup: I'm using a 1410 with the dual-core SU2300, Windows 7 Pro x64, latest version of MPC-HC, latest version of Haali Splitter, latest Intel 4 Series drivers (version 1986), and the ffdshow x64 audio-only filters. I'm also using the Divx 7 Tech Preview for thumbnails and improved performance on WMP.

Sony :: Intel Video Driver Download Link
forum.notebookreview.com
I know this has been mentioned some times at the forum - but all the links i have found are "dead". I need the Intel Video driver for the Vaio Z.. and i managed to find this link: [url] Which one should i get?

Samsung :: I770(saga) / Drivers For Phone / Link To Download
www.howardforums.com
Does any1 has drivers for Samsung I770(saga)? Or can someone give me a link where I can download it? Any help will greatly be appreciate it.

ATI Driver Won't Install
www.sevenforums.com
I have a Toshiba Satellite Laptop and I installed Windows 7 Build 7100 on it. However, Open GL games do not work, and I have the ATI 8.56 graphics driver installed and I am trying to upgrade it to the latest 8.61. However, after I run the installer, my screen does not blink and once installation is complete, I do not see a change in the driver version - and catalyst is not installed as well. However, when i am trying to re-install it says the drivers are already installed. Any ideas as to whats going wrong? Its a 32-bit OS. I cannot run any OpenGL games, they fail saying it could not load OpenGL.

Sony :: Intel WiFi Link 5100 AGN Driver
forum.notebookreview.com
I recently installed Windows 7 Home Premium 64 Bit edition on my Vaio FW490 (upgraded from Vista 64). I received the free upgrade disks from Sony. When I checked my device manager I noticed that the driver version for the WiFi Link 5100 is 11.4.3.9 dated 5/28/09. On the Sony Site, they list the version for Windows 7 as 12.4.1.11 dated 10/8/2009, and when I checked on the Intel site, they are recommending driver version 13.0.0.107 dated 10/21/09.

Dell :: M1330 Onboard Intel Video Driver
forum.notebookreview.com
I'm trying to get the latest video driver from Intel, but I couldn't install it. It gives me a message saying something like the product compatibility is not verified for my system. How do I get the latest driver for my gm965 chipset?

Sony :: VaioVgn31z Driver Vga Download
forum.notebookreview.com
I had Vista on my notebook and downgraded it to Xp. And now I can't download any of the Video Controller VGA Compatible driver that is on the internet. I tried many download links and none of them wanted to complete the installation. It always says can't install. And now I tried to uninstall this driver and install it back again but it's gone and I don't find it anymore on the device manager.

Dell :: Driver Download
forum.notebookreview.com
I'm trying to download a driver from Dell and all I get is the download of their "DellDriverDownloadManager" I have already downloaded and installed the manager. When I run it it says "no files are selected. Please go to the Drivers and Downloads to select a file"

Sony :: Windows 7 FW Intel Chipset Driver
forum.notebookreview.com
I clean installed the Windows 7. However, I am unable to install the Intel chipset driver. I try to install the one download from the Sony website and the one download from Intel website, but there is a error message come up to say I have a imcompatible machine (something like that). Because I can't install the newer Intel chipset driver, the SM Bus Controller is not installed properly too. It has a ! mark besides it.

Sony :: Windows 7 Intel 965 Chipset WDDM 1.1 Driver Update
forum.notebookreview.com
Windows Update showed a new update to the graphics driver for the 965 which applies to my SZ and whatever other model uses the 965. It seems to have fixed the "glitchy" aero border.

Dell :: Studio XPS 1645 Driver Download Site
forum.notebookreview.com
http://support.dell.com/support/down...cnt=1&vercnt=1 According to this driver site for 1645, most of the drivers are all up-to-date. Could I apply updates for my XPS 1640 here ?

Sony :: VGN-Z750D Video Driver
forum.notebookreview.com
I have installed Windows Server 2008, are there any video drivers available that will work for this machine with WS2008? I just have the default driver and its stretching left to right?

Sony :: Installed New Win 7 Video Driver
forum.notebookreview.com
I have updated my bios to R4041M3, performed a clean install of Windows 7, and installed all the new win 7 drivers including the video driver from this page: http://esupport.sony.com/US/perl/swu...=5151&os_id=47

Sony :: Z Series Widows 7 Video Driver
forum.notebookreview.com
I just installed windows 7 on my sony z. The notebook has nvidia geforce 9300m gs which is a 512MB. However, when I check the screen properties on windows 7 it show that the video card is only 256MB

Sony :: Vaio Z Windows 7 (video Driver )
forum.notebookreview.com
I've upgraded my vaio z47gd to 64 bit win7. However my nvidia graphic driver messed up. It seems like screen divided to two sections with bad refresh rate. Anyone else having this problem?. Also can anyone point me to the right place to download win7 64 bit drivers. I can't see them on the sony site.

Sony :: Z Windows 7 X64 Video Driver
forum.notebookreview.com
I have the hybrid graphics and I can't find a Windows 7 x64 driver for it. I've got everything else working, but I had to use the Vista driver for video.

Sony ::Vaio CW Crashing :: Video Driver Has Been Recovered
forum.notebookreview.com
just started using this laptop last night and now when watching a video it sputtered and turned white got a brief message saying some Video driver has been recovered

Sony :: No Win 7 Video Driver Available For Z6xx Or Z7xx
forum.notebookreview.com
I just noticed that there is no win 7 video drivers available for all those models except the new vaio z890 ones

Dell :: Beware Intel Matrix Driver 8.6
forum.notebookreview.com
I've had good results from installing the Intel matrix storage driver v8.5 direct from Intel (newer than the Dell version) but tonight I tried the even newer v8.6 version from Intel and have had two blue screens, so having to revert.

Dell :: Installing Video Drivers Straight From Intel...Impossible
forum.notebookreview.com
I periodically check Dell's site for updated video drivers but they are always sooo old. (Dell's driver-Version 7. something, Intel's-Version 11.something) Intel's site is much more up to date. Anyway, I'll download the Intel drivers and attempt to run the installer. It'll extract all the files but then close and show a message stating that the driver isn't "validated" to run on this computer and that I must get driver updates from my pc maker. Why are others able to install the drivers, even on other Dell systems? Is it a business notebook thing due to the need for stable system images?

HP/Compaq :: Is There A Way To Get Official Intel Video Drivers On A DV5-1000us
forum.notebookreview.com
If there a way to install official Intel video drivers on an HP DV5-1000us? A friends friend has one and I tried extracting the files from the .exe then updating the drivers thru the device manager but it won't take the drivers prob due to a hardware id # hp had changed to prevent people from installing all but thier own "optimized" ( my ) drivers. And this DV5 is the one with the GMA X4500 video adapter in case anyones wondering.

Dell :: Intel Mobile Chipset Driver + Win7
forum.notebookreview.com
I know a few people have installed Win7 on their Lattitudes and Precisions ... I decided to try out a clean install but as I work through the driver installs I get stuck at the chipset drivers which refuse to install, saying "This operating system is not supported .....

Dell :: Intel Centrino WiMAX 6250 Driver
forum.notebookreview.com
I followed a couple threads on here on how to format and reload everything from scratch. It has worked perfectly and I'm much more happier without the Dell bloatware. That said, the only issue (not sure if it's really an issue) that I'm having is with the WiMAX 6250 driver. I downloaded the latest drivers from here: http://downloadcenter.intel.com/Deta...18748&lang=eng They aren't even listed on Dell's website (not that I would use Dell's over Intels anyway). The wifi and everything seems to be working fine. However, when I look under device manager, it's the only one that has an "!" on it. It says that the driver isn't loaded. Again, I don't know this is really a problem since it's working, but I just wanted to make sure this won't hurt me down the road or if anyone else knows how to fix it.

Dell :: E6500 And Intel Wifi 6300 Driver Issues
forum.notebookreview.com
seeing that Dell released a driver supporting 6300, I went and bought one to replace my 5100. Plugged it in, and it wasn't recognized. Fair enough, I went to reinstall the driver.. which immediately finished. Setup log said error discovering intel device, or something like that. Problem is, the device is working fine as far as windows is concerned - it is detected, I can connect using windows networks screen. But ControlPoint Connection manager does not see it. What am I missing?

Dell :: M1330 Bios A15 + Latest Intel Drivers = Dead Video
forum.notebookreview.com
Was having an issue on bios A12 (I think it was) with the brightness (function keys were not adjusting it properly), so updated the bios to A15 and the latest intel drivers as advised. (have intel, not nvidia). Now the screen on boot is either blank or with only blue lines. Can hear it booting into windows so the system on the whole seems fine. Have got it working successfully on an external monitor via the vga port. I have tried to reapply the A15 bios and reinstall the intel drivers but not changed anything. The display properties in windows shows the laptop monitor as stuck on 640x480 and low colours. screen is off on 640x480 and if upped to the only other option 800x600 gives blue lines.

Dell :: E6400 -- Any Benefit To Updating Intel Display Adapter Driver
forum.notebookreview.com
The latest version of the Intel Intel Display Adapter Driver available on the Dell website is 6.14.10.4980 dated 08/25/2008.. The Intel website shows Version 6.14.10.5029 dated 01/21/2009 is available.. Has anyone updated their E6400 to this new driver? Does anyone know of any specific benefits or problems with this new driver?..

Dell :: New Latitude / Precision Intel Matrix Storage Driver / Manager
forum.notebookreview.com
Matrix Storage Driver 8.7.0.1007 Matrix Storage Manager 8.7.0.1007 Quote: Level of Importance: Urgent Dell highly recommends applying this update as soon as possible. The update contains changes to improve the reliability and availability of your Dell system. Compatibility SystemsOperating systems Latitude E4200 Latitude E4300 Latitude E6400 Latitude E6400 ATG Latitude E6500 Dell Precision Mobile WorkStation M2400 Dell Precision Mobile WorkStation M4400 Dell Precision Mobile WorkStation M6400 Microsoft Windows Vista 32-bit Microsoft Windows Vista 64-bit Microsoft Windows XP Microsoft Windows XP x64 Fixes and Enhancements - Changes made to reduce power consumption improving battery performance. - Corrects random issues related to not being able read/write to and from CD/DVD optical drives.

Dell :: Intel GMA 965/x3100 On M1330 - Can't Install Driver
forum.notebookreview.com
I bought a second hand M1330 on ebay with the intel graphics. I can't seem to get a driver installed no matter which one I use. I've tried both Vista and Windows 7 but in both cases when I'm trying to install the drivers, I get an error message saying The computer does not meet the minimum requirements for installing the software. Setup with exit. I've tried both drivers from the intel site as well as the dell site but no luck. Any ideas?

Dell :: Install Intel GM45 Express Chipset Driver For XP Pro Configuration
forum.notebookreview.com
I'm in the process of creating an XP Pro operating system install for my new Inspiron 1545, on a new SATA hard drive (taking out the original SATA hard drive from Dell with Vista preinstalled to use as separate bootup opsys which I have to reinstall to zap all the bloatware later). Things were going really really well (I thought) with setting up my new drive with XP and I got past the problem that bites most folks (SATA hard drive not being recognized by XP install), by switching the drive in BIOS to ATA mode b4 doing the install. I got XP completely installed & activated AOK, with only a few minor wrinkles which I was able to figure out. Applied a few simple quick tweaks to XP to make it easier for me to use (disabling autoplay, killing the search dog, setting folder views, removing stuff I don't use like Windows messenger, MSN, etc). Then I went to install all of the necessary Dell drivers from the website for the 1545 for (in order) Intel GM45 Chipset, Video, Ethernet, Dell Quickset, Wireless, Sound, Card reader, and Alps touchpad. I had figured that stuff out already and had all the drivers copied over to the new PC ready to go .....

Dell :: M1530Best 8600M Video Driver?
forum.notebookreview.com
I have an M1530 that has the 8600M video adapter in it. Currently I am using the Dell 176.44 driver and I am wondering if that is best. I notice from time to time that my desktop display gets very slow where the window tracking is not smooth like normal. I don't play games on this laptop, as it is purely for business use, but I do use programs like Photoshop, Dreamweaver, GIMP.. and other design applications.

Dell :: Latest Greatest Video Driver
www.notebookforums.com
I've been out of the loop for few years, as in, not paying much attention to my i9100 (w/ATI 9800...unmodded). Now I've totally dumped and reloaded it with XP pro and I am using whatever MS uses for a v-driver when there is nothing else. Everything else has been updated with the latest from the Dell site, and XP Pro too. I use this rig for light to medium duty gaming, and soon, I hope, watching net TV on it....and then all the other standard computery things that don't really need anything fancy for a video driver ....

Dell :: 8400GS Or NVidia Video Driver
forum.notebookreview.com
My Vostro 1510 laptop came with the latest 8400GS video card driver from Dell. Is it unwise to try the latest driver from nVidias site? I've been reading that some drivers can run a little cooler. HWMonitor says my GPU normally runs at 60c, a little warm from what I'm reading.

Dell :: Inspiron E1705 Video Driver
forum.notebookreview.com
I'm looking for help finishing up reformatting my Dell Inspiron E1705. As far as I can tell, everything up back to normal after the the reformat and reinstall of XP. Finally got all my drivers figured out and everything seems to be working except...

HTC Desire Z :: Link For Download Usb Drivers?
androidforums.com
anyone know a link to desire z usb drivers?

Python Libraries And Drivers?
stackoverflow.com
I have no knowledge of Python. I started with .NET and than learned PHP. Someone later asked me to learn Ruby as well. I started learning it. Since last few months I am seeing many libraries and drivers written in Python. I want to know what are the advantages of Python over PHP/Ruby? What type of language it is and is there a need to learn Python as well? Which is the purest version of Python? I could see many variants there like IronPython etc.

Dell :: Intel® WiFi Link 5300 And Intel® WiFi Link 5100 Products New Driver [13.1.1.1]
forum.notebookreview.com
Download Link ...

Can't Connect To Hp 4500n
www.tomshardware.com
I install widows 7 64 bit know i can not print to my hp 4500n though a RJ-45 plug. Here is the things I have did install wizard hp, and windows add a printer and last thing a static Ip And try to connect that way. I also install pcl5 driver did not work so i did the 64 bit driver

Netgear Adapter Won't Work
www.sevenforums.com
Just installed windows 7 64 bit. I'm using a pci wireless adapter chip, Netgear wg311v3 I installed the netgear driver automatically, and then installed the netger smart wizard. However, the smart wizard will not start up. I've done some research, and apparently netgear doesn't make 64bit drivers. I've also tried using the chipset driver which is a Marvell 88w8335. But I may not have used the right driver. To sum it up: I have a netgear wg311v3 adapter. Running Windows 7 64bit. It won't run the wizard. What should I do? Do I need to go back to 32 bit?

Windows To Linux Server
forums.mysql.com
I am trying to set up a a Mysql driver on a linux server from a windows machine. I get the following error. [MySQL][ODBC 3.51 Driver]Host '(server number)' is not allowed to connect to this MySQL server Is it likely that the windows-linux combination is causing a problem here?

Link To Mysql
www.dbforums.com
I tired to create a link 'MYSQL' in a SQL Server using the following code : EXEC sp_addlinkedserver @server = ‘mysql’, @provider = 'MSDASQL', @provstr = 'DRIVER={MySQL ODBC 3.51 Driver};SERVER=MySQLServer;UID=root;PWD=;' NB: I have a DB by the name of : MYSQL There is no errors during creation ... The link creation is OK but I am not able to see tables from SQL Server… Any Idea ?

Access :: Space In Database Name In Connectionstring?
forums.asp.net
I am in trouble writing connectionstring in app.config. Actually database name contains space in its name. following is the connectionstring i want to put in app.config. but when i do the same it gives me error. how to solve this problem ? <add name="Connection" connectionString="Driver={Microsoft Access Driver (*.mdb)};Dbq=C:Program FilesInsigniaTime & Attendence.mdb;Uid=;Pwd=admin;" /> here, database is access db having name as 'Time & Attendence.mdb'

Samsung :: Data Link Cable - Cannot Get Bitpim To Detect Phone
www.howardforums.com
i just got a samsung sch a870 and i have a link cable from a650 that fits into the phone, i downloaded some drivers that were posted on this site in some thread and it says that my phone is recognized by my computer as a modem or something, but anyways, i cannot get bitpim to detect my phone, is there any information that you can provide me iwth.

Error Messages When Speakers / Headphones Are Not Connect
www.sevenforums.com
I am having a rather strange issue which, although is not hindering the use of my computer, is still something that I would like to try and resolve. I purchased a Dell Inspiron 545 about a month ago (first week of Oct. 09). Given that Windows 7 wasn't available at that time to the general public, my new computer came with Vista Home Premium. My computer does not currently have an aftermarket sound card; I only have the OEM one that came with the computer. Also, I currently do not have any speakers or any other external audio devices that are currently hooked up to my computer. While I was using Vista I never had any problems or warning prompts appear when using audio programs like iTunes even though I didn't have any external audio devices connected to my computer. No problem there. When I received my copy of Windows 7 Pro I decided to do a clean install on my computer. After installing 7 I went through and manually installed all of the audio drivers that were on my computer when I received it from Dell (note: although the audio drivers were the same the re-installed ones were the updated versions designed for Win 7). I didn't use the driver disk that came with my computer though, because of the hassle of using those disks. Instead I manually downloaded the drivers that I needed from the Dell support page. After re-installing all of the drivers, updates, and programs on Win 7 I noticed the following: every time that I opened an audio program like iTunes I would receive a warning prompt claiming that "iTunes has discovered a problem with your audio configuration; audio may not operate properly". Furthermore, I have a Sony voice recorder that I use for school and the program for the recorder gives a similar error message claiming that "the file cannot be played back; check your audio drivers or operating system". In addition, this error message prevents me from editing any of the voice files I have saved on my computer. But the strange thing is that all of these error messages disappear when I plug in my headphones. The messages go away, I am allowed to edit my voice files, and the sound works great. As I said above, the audio drivers I currently have installed are identical to those that originally came with my computer. Given that I had never received similar error messages when not having speakers or headphones hooked up to any of my past computers or to my current computer before I installed Windows 7, I am assuming that the operating system is the culprit. Has anyone else experienced this problem and if so, do you know how to fix it?

Cannot Connect To Pc?
discussions.apple.com
I've just got an Ipad. When I plugged it in to my pc, nothing happened. The pc did not register it at all. I've tried to reinstall Itunes and tried to restore the Ipad with no luck. When I put the Ipad in recovery mode the pc find the device, but cannot recognize it. I've tried to install the driver manually, but it said that the driver-file do not have informations about that device. (or something like that)What to do? Information: Ipad

HP/Compaq :: HDX16- Intel Wifi Link 5100
forum.notebookreview.com
I just got a new HDX16. Been having issues with the intel 5100 agn. I've updated drivers to no effect. It would stay connected for awhile, but loose all connection at times. Its starting to be a pain. It can't even pickup my neighbors' connects and I have 10 in my area which my Toshiba picks up. Its paired to the Dlink DIR-855.

Sony :: Software To Download When Upgrading SR490 To Windows 7
forum.notebookreview.com
I am upgrading my Sr490 to windows 7. I was wondering what software I have to download and what drivers. I am also looking for the one click check up and vaiocare stuff that came with the sr490 originally. how loud people think their SR is.

Importing MySQL BLOB To MSSQL
www.dbforums.com
Hi all! I'm trying importing a MySQL database to my MSSQL server. I've donwloaded the MySQL ODBC drivers and I can connect succesfully throught a DSN to my MySQL server. Everything works fine EXEPT my BLOB field. I'm using a BLOB field for storing a binary file. When I choose preview while importing my bob field is empty. I'm desperate! :eek:

How To Create A Linked Server To MySQL From MsSQL?
www.dbforums.com
I can create a linked server to another MsSQL from MsSQL,but encounter error when create a linked server to MySQL: Error 7399:OLE DB provider 'MSDASQL' reported an error. Data source name not found and no default driver specified. ...... Anyone can help me? Thanks!

Data - Read A File On Server A Write To Server B?
stackoverflow.com
I want to pick up series of files from a file production server and move extracts to development server nightly. Servers are IBM running db2. I can use native drivers or ODBC. I was thinking about using php. One option was to iterate through source file and insert to development server. Another idea was read source file into array and then iterate array and write to development server.

Connection Code Placing
www.xtremevbtalk.com
hi guru,where should i put this connection codes? im using vb 6 and currently developing an application.thanxp/s : i have everything that we need installed.just dun know where to put this code.thanx.-------------------------------------------------------------------------Option ExplicitPublic conn As ADODB.ConnectionPublic Function SetConnection(m_con As String) As ADODB.Connection On Error Goto ErrorTrap Dim conn As ADODB.Connection Set conn = New ADODB.Connection conn.CursorLocation = adUseClient conn.ConnectionString = "DRIVER={MySQL ODBC 3.51 Driver};" _ & "SERVER=xx.x.xxx.xxx;" _ & "DATABASE=xxxxxxx;" _ & "UID=xxxxxxx;" _ & "PWD=xxxxxxx;" _ & "OPTION=" & 1 + 2 + 8 + 32 + 2048 + 16384 conn.Open Set SetConnection = conn ExitPoint: Exit FunctionErrorTrap: Set SetConnection = Nothing MsgBox "You must be Connected to the internet before running Club Click" Resume ExitPoint End Function--------------------------------------------------------------------------

Sybase Interface File
www.vbforums.com
Hi Team, the app I'm working on prepares an ADO connection string that looks as followsDriver={SYBASE ASE ODBC Driver};Srvr=TEST1;DB=dbname;Uid=userid;Pwd=passw0rdThe access settings are correct. When I try to connect I get a message saying "Unable to locate Inerfaces File". It seems that ADO knows it needs to use an interface file if it's connecting to Sybase. How do I set this interface file location?ThanksFW

Android :: Video Out - Support Additional Bluetooth Profiles
androidforums.com
I know that as of now it's not possible, and the hacked usb port is still pretty useless. But as far as I know, with the VDP profile on Bluetooth it should be theoretically possible with more (relatively) simple software hack. As I understand Bluetooth profiles, they are essentially software drivers for the hardware, and most Android devices support Bluetooth 2.1 which should be fast enough (~366KBytes/s) to transmit standard def video. Just wondering if anyone is working on or knows of a way to support additional bluetooth profiles on a rooted Android system?

VPSByte Fraud "Protection"
www.sitepoint.com
I use a company called VPSByte for basic unmanged VPS service. They are asking me to scan a copy of my drivers license as well as my credit card and post it on their private support page for fraud protection reasons. I think this is rather absurd. Is this normal? I'm not doing it, I think it's stupid, never mind that I don't have a scanner.

Change Error Message In Control?
forums.asp.net
I have a control that holds a dropdownlist of U.S. states.   There is a required field validator with the text of the ErrorMessage="State"   I would like to change this at run time to represent the names of the different fields that this is required on.   for example it could say  ErrorMessage="State, Previous Address 1" or ErrorMessage="Driver's License State"

Link MySQL And MsSQL 2000
www.dbforums.com
I am trying to set up mySQL as a linked server in MSSQL. I have done this with both servers on the same machine but they reside on different machines. I have a working ODBC system datasource. But when I try to access the tables from MSSQL enterprise manager-security-linked servers I get "Error 7399:OLE DB provider 'MSDASQL' reported an error. Data source name not found and no default driver specified] OLE DB error trace [OLE/DB Provider 'MSDASQL' IDBInitialize::Initialize returned 0x80004005: ]. I suspect it is the settings I am using in the Linked server wizard. Does anyone know either the ad_linkedserver sp parameters, or what I should be entering into the linked server wizard in enterprise manager.

Can't Connect HP C7280 Printer To Computer
www.sevenforums.com
I just installed Win 7 home premium. When I go to my printer which is on the wireless network, I can print with no problems. When I try to scan I go to HP Solution center to scan and it I get a message that my device is not connected. I then reinstalled all the Win 7 drivers for the HP C7280 all in one printer and when I go to connect to the printer device, I get the error message that it can not connect to the printer. The printer did show up. I also disabled the norton firewall.

Installation Won't Reboot
www.sevenforums.com
I've been trying to install Windows 7 on a brand new computer. It's running RAID 0, and I'm using the latest drivers from my motherboard manufacturer. Starting up the installation seems to work fine. It goes through the first phase of installation where I choose which partition I want to use, and it starts to copy files from the dvd, yada yada yada. After the "installing updates" section, a window pops up with the following message: "Windows could not prepare the computer to boot into the next phase of installation. To install Windows, restart the installation." It then kicks me back to the start of installation. If I start the install again, it does the same thing. If I reboot and restart installation, also the same. If I try a startup repair, I get a message saying that Startup Repair cannot repair this computer automatically. I've tried this on two builds--7000 and 7077. Both have the same result.

Laptop Won't Sleep
www.w7forums.com
Today, I installed Home Premium 32 bit (it's dual booting with Win 2K Pro) on a Dell Latitude C640. After much patience, googling and having a driver disc for this laptop, I finally finished the install. For a 2002 model laptop, it looks pretty good. The only known problem that I'm having is that it won't go into sleep mode. All of the other options are there except that. Windows 7 will install on almost anything there is, it looks like. Anyone have a suggestion for the sleep mode problem?

MySQL To MsSQL 2005
forums.asp.net
Hi! How can i convert this code to work with MsSQL 2005? /Tomas  Partial Class skaalb Inherits System.Web.UI.Page Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click Dim strConnectionString As String Dim strQuery As String Dim MyConnection As OdbcConnection Dim myCommand As OdbcCommand Dim path As String = Server.MapPath("~/album") & "/" Dim albName As String = Trim(Replace(txtAlbum.Text, "'", "''")) Dim folderName As String = Trim(Replace(txtAlbum.Text, "'", "''")) folderName = Replace(folderName, " ", "_") Try If Not My.Computer.FileSystem.DirectoryExists(path & folderName) Then My.Computer.FileSystem.CreateDirectory(path & folderName) labelStatus.Text = "Folder <b>" & folderName & "</b> created!" Dim Beskrivning As String = Trim(Replace(txtBeskrivning.Text, "'", "''")) strConnectionString = "DRIVER={MySQL ODBC 3.51 Driver}; SERVER=xxxxxxxx; DATABASE=xxxxxxx; UID=xxxxxxxx; PASSWORD=xxxxxxxxx; OPTION=3" MyConnection = New OdbcConnection(strConnectionString) MyConnection.Open() strQuery = "INSERT INTO tbl_albumet(alb_Namn, alb_Beskrivning, alb_Mapp) VALUES (?, ?, ?)" myCommand = New OdbcCommand(strQuery, MyConnection) myCommand.Parameters.AddWithValue("?", albName) myCommand.Parameters.AddWithValue("?", Beskrivning) myCommand.Parameters.AddWithValue("?", folderName) myCommand.ExecuteNonQuery() MyConnection.Close() Else labelStatus.Text = "Folder excist, pick another name!" End If Catch ex As Exception labelStatus.Text = "Unable to create folder!" End Try End Sub End Class 

Make Access Link To Foxpro Database
www.xtremevbtalk.com
Hi all,I would like to make a link in my Access DB to a Foxpro database. So I follow the code that I search here:Public Sub CreateLinkedAccessTable(LinkInDB As String, _ LinkToDB As String, _ LinkToTbl As String, _ LinkTblAs As String) Dim catDB As ADOX.Catalog Dim tblLink As ADOX.Table Set catDB = New ADOX.Catalog ' Open a Catalog on the database in which to create the link. catDB.ActiveConnection = "Provider=Microsoft.Jet.OLEDB.4.0;" & _ "Data Source=" & LinkInDB Set tblLink = New ADOX.Table With tblLink ' Name the new Table and set its ParentCatalog property to the ' open Catalog to allow access to the Properties collection. .Name = LinkTblAs Set .ParentCatalog = catDB ' Set the properties to create the link. .Properties("Jet OLEDB:Create Link") = True '.Properties("Jet OLEDB:Link Datasource") = LinkToDB'-------------------------------------------------------------------------------------------' HERE I MODIFIEDDim s' USE DSN-LESS , FAILs = "ODBC;Driver={Microsoft Visual FoxPro Driver};" & _"SourceType=DBC;" & _"SourceDB=C: est.dbc;" & _"Exclusive=No"' USE DSN, OKAYs = "ODBC;DSN=TEST"'------------------------------------------------------------------------------------------- .Properties("Jet OLEDB:Remote Table Name") = LinkToTbl .Properties("Jet OLEDB:Link Provider String") = s End With ' Append the table to the Tables collection. catDB.Tables.Append tblLink Set catDB = NothingEnd SubSo, while I make a DSN in Control panel/ODBC data source, the above code can be done. However, I would not like to make a DSN. So I try using DSN-less to do the code. However, I got error "ODBC--call failed". Do you know why?Much thx.

Slow Transfer Speeds Between Two Win 2008 Servers
www.webhostingtalk.com
I have two servers running windows 2008(rtm) and I'm getting just crappy transfer speeds between them. server 1: dual xeon quad core 8gb ram dynamic mirrored disks (windows software raid, ick i know hyper-V, 6 or so VMs, not real heavy load server 2: dual xeon quad core 8gb ram 3ware 9650Se raid card, raid1 (using latest engineering drivers/firmware) The servers are connected to each other via gigabit crossover. When I start to do a file transfer (a 40gb virtual machine, through windows file sharing) it starts fast. 60+MB/s says 12minutes remain but after 5minutes and 5gb or so of transfer it's slowed way down to 7MB/s and the network usage graph that was smooth and is now choppy.

Kohana Controller Setup Unexpectly Slow?
stackoverflow.com
I am a fairly experienced PHP developer, who is new to kohana.I have built a website with Kohana, but after I uploaded to my server, I found part "Controller Setup" is unusually slow, took over 12s, whilst other take less than 0.5s, Kohana Loading 0.014 1 0.49MB Environment Setup 0.004 1 0.05MB System Initialization 0.007 1 0.14MB Controller Setup 12.058 1 1.42MB ReflectionClass >newInstance() 12.054 1 1.35MB Controller Execution 0.036 1 0.25MB Total Execution 12.117 1 2.30MB By digging into Kohana core, I have found ReflectionClass >newInstance() is causing the problemBut am not sure where I should go from here. :(I have dug deeper into my own code, looks like its Session::instance() whos causing the problem.Session::instance() 12.032 1 1.03MBFurther to my problem tracking, I have changed session driver to cache, and cache to memcache. But not much improvement. So I opened session.php, found this. /** * Singleton instance of Session. */ [code]...

Xml From Remote
www.webmasterworld.com
PHP Version 5.0.4 on the server im using here is a snippet from the remote address: <?xml version="1.0" encoding="utf-8"?><?xml version=&#391;.0'?> <response> <result>OK</result> <responsedatetime>12/01/2007 13:36:55</responsedatetime> <product> <stockcode>0GRLIFTVLR306N</stockcode> <description>FLY DVBT HYBRID DIGITAL TV PCI RETAIL</description> <extendeddescription>All Graded and Refurbished products carry a 30-day Dead On Arrival Warranty (rest of existing warranty if an RMA replacement). All product is likely to be incomplete, missing packaging and drivers etc. The price of these items has been reduced to reflect</extendeddescription> <stock>3</stock> <price>20.00</price> <category>0101</category> once this is done i can then make this a cron job to run during the night as i will need to empty the db and insert with this new content.

Computer Won't Stay Off
www.sevenforums.com
I am about at wits end when it comes to this computer. I just built it like last week, and everything runs beautifully about it; that is, except that the dang thing won't stay turned off! I tell it to shutdown, and it turns itself back on after about two or three seconds. Let me clarify: the computer itself does NOT randomly shutdown, nor am I having problems with sleep or hibernate (haven't used them yet). Ok, so I have tried about everything on every help forum I've read from here to knittingforums.com. I have disable all wake events, including the ones in regards to network adapters. I have disabled automatic restart, and even fooled around in the BIOS, disabling all wake events. I've even flipped around between BIOS commanded and OS commanded event wakes in the BIOS. About the only thing I can do is log off of my user account, and then do a hard shutdown. Even did the thing where you specifically set what the power button does. So... please help! I will be most gracious, and will give any more information if necessary. The only thing I have NOT done is flash the BIOS; it won't recognize the USB device I have the updated drivers on.

802.3ad (bonding/link Aggregation) On Cisco 2960 W/linux
www.webhostingtalk.com
I thought with 802.3ad I could aggregate the links and thus turn a 3x100 megabit pipes to one 300 meg pipe. The problem is when using the default options (and layer2 xmit mode) I only get the bandwidth of a single connection and I see no other traffic on the other two. Here is output from /proc/net/bonding/bond0: Code: Ethernet Channel Bonding Driver: v3.3.0 (June 10, 2008) Bonding Mode: IEEE 802.3ad Dynamic link aggregation Transmit Hash Policy: layer2 (0) MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 0 Down Delay (ms): 0 802.3ad info LACP rate: slow Active Aggregator Info: Aggregator ID: 2 Number of ports: 3 Actor Key: 9 Partner Key: 3 Partner Mac Address: 00:1e:f6:xx:xx:xx Slave Interface: eth0 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:1e:8c:xx:xx:xx Aggregator ID: 1 Slave Interface: eth2 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:04:23:xx:xx:xx Aggregator ID: 1 Slave Interface: eth3 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:04:23:xx:xx:xx Aggregator ID: 1 Basically it works in that I get a connection but its no different from being on a regular 100/100 connection. Downloading files my machine from completely different networks always only goes out one connection. I don't even see any received/sent packets from the other two interfaces. When I tell it to use layer3+4 via the xmit_hash_policy paramter when loading the module IE: modprobe bonding mode=4 xmit_hash_policy=layer3+4 miimon=100 It seems to work as expected except it looks like all incomming traffic comes in on the same interface and its not much different from a normal load balancing (except from a single IP address). I will stick to this method if I have no choice as I don't really care about the download all that much and it seems to do a good job. Here is /proc/net/bonding/bond0 from that config: Code: Ethernet Channel Bonding Driver: v3.3.0 (June 10, 2008) Bonding Mode: IEEE 802.3ad Dynamic link aggregation Transmit Hash Policy: layer3+4 (1) MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 0 Down Delay (ms): 0 802.3ad info LACP rate: slow Active Aggregator Info: Aggregator ID: 2 Number of ports: 3 Actor Key: 9 Partner Key: 3 Partner Mac Address: 00:1e:f6:xx:xx:xx Slave Interface: eth0 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:1e:8c:xx:xx:xx Aggregator ID: 2 Slave Interface: eth2 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:04:23:xx:xx:xx Aggregator ID: 2 Slave Interface: eth3 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:04:23:xx:xx:xx Aggregator ID: 2 My understanding is that with layer2 it should just be one big fat pipe. IE: packets are fragmented and thus even a single connection should be able to sustain 300 megabits (if the other end could provide it). It seems like it just doesn't use my other interfaces at all when doing this. Here is my config on the cisco 2960: Code: interface Port-channel3 switchport access vlan 100 switchport trunk allowed vlan 100 switchport mode access switchport nonegotiate spanning-tree portfast ! interface FastEthernet0/10 switchport access vlan 100 switchport trunk allowed vlan 100 switchport mode access switchport nonegotiate channel-protocol lacp channel-group 3 mode active spanning-tree portfast ! interface FastEthernet0/38 switchport access vlan 100 switchport trunk allowed vlan 100 switchport mode access switchport nonegotiate channel-protocol lacp channel-group 3 mode active spanning-tree portfast ! interface FastEthernet0/40 switchport access vlan 100 switchport trunk allowed vlan 100 switchport mode access switchport nonegotiate channel-protocol lacp channel-group 3 mode active spanning-tree portfast

SQL Server :: Separate Web & Database?
forums.asp.net
Currently, we have our ASP.NET applications running on windows server 2003.  All of our data resides on an IBM ISeries / AS400.  The 400 people are going to be creating massive new tables with millions of records.  Because of this, I've been asked to look into the idea of putting new ASP.NET pages on the IBM ISeries server.  This server uses APACHE.  I have read that to do this, I will need to use the Mod_Mono Apache module. I would like to come up with a list of benefits and drawbacks to this new idea.  Initially, it seems like this is a bad idea for a few reasons: Security: if a users gets unauthorized access to our local server(s), they will only have access to either DB or web server, not both. Maintainability: Microsoft ASP.NET is easier to implement on a Microsoft Windows Server. Problem Solving: I will have to first determine if an issue is due to the ISeries server, or the Apache server, or the ASP.NET application. This could be countered by saying that I would already have to determine if the issue is due to Windows server, or ASP.NET application.  However I have better experience with troubleshooting on a windows box that I am familiar with. Problem Creating: I could escentially create a problem that not only takes down the web server, but the database as well, and other RPG programs running on the ISeries. Resources: The database server will not have to server my application, it will only have to retrieve the data for it. Drivers: The windows server already contains many drivers and .DLL's that are used... will these even exist on the ISeries? How easy (if even possible) would it be to get them on the ISeries if they dont exist..? A few positive thoughts: The application will reside on the same server as the data, thus, it may be quicker at retrieving data from these millions of records in a table. This was the main point as to why I should look into this possibility. Single point of failure. We no longer have to worry about two servers going down and causing this application to be unavailable...

Batch Inserts And Prepared Query Error?
stackoverflow.com
Ok, so I need to populate a MS Access database table with results from a MySQL query. That's not hard at all. I've got the program written to where it copies a template .mdb file to a temp name and opens it via odbc. No problem so far.I've noticed that Access does not support batch inserting (VALUES (foo, bar), (second, query), (third query)). So that means I need to execute one query per row (there are potentially hundreds of thousands of rows). Initial performance tests show a rate of around 900 inserts/sec into Access. With our largest data sets, that could mean execution times of minutes (Which isn't the end of the world, but obviously the faster the better). So, I tried testing a prepared statement. But I keep getting an error (Warning: odbc_execute() [function.odbc-execute]: SQL error: [Microsoft][ODBC Microsoft Access Driver]COUNT field incorrect , SQL state 07001 in SQLExecute in D:....php on line 30). Here's the code I'm using (Line 30 is odbc_execute): $sql = 'INSERT INTO table ([field0], [field1], [field2], [field3], [field4], [field5]) VALUES (?, ?, ?, ?, ?, ?)';[code].... So my question is two fold. First, is there any idea on why I'm getting that error (I've checked, and the number in the array matches the field list which matches the number of parameter ? markers)? And second, should I even bother with this or just use the straight INSERT statements? Like I said, time isn't critical, but if it's possible, I'd like to get that time as low as possible (Then again, I may be limited by disk throughput, since 900 operations/sec is high already)...