Samsung Galaxy S II :: Email Setup - SMTP Server Does Not Support Authentication


Trying to setup my email - pop3 goes through fine but, smtp comes up with 'Server does not support authentication'. All full stops etc., are in the right place, why did it set up fine on the Galaxy S and not the S2?

View Answers
Very similar questions



CPanel E-mail :: SMTP - Disable Auth And Allow Relay Via Whitelist Senders forums.cpanel.net

After spending days to find out how to setup my cPanel DNSONLY server [WHM 11.48.1 (build 3)] to act as a relay server for my selected clients, without having to create an email account locally on the server, solely an relay SMTP server, as there are some ISP's that have issues with their SMTP server, so I am offering this as a service to my clients only.....So I am trying to setup my SMTP server to either: [Legend:] whitelisted senders (/etc/exim/whitelist_sender <= has the clients EMAIL addresses listed in it) (a) disable it's authentication requirement and allow relays only for whitelisted senders, or (b) allow whitelisted_senders to relay emails without authentication, and if not whitelisted, then needs to authenticate before sending... ie. Client sends email || SMTP server || || |------> Email address Whitelisted? || ||-----NO | | | | | User Authenticated itself? | | | | | |--NO ==> REJECT | | |------Yes ====> Receive and relay (Send) email Above is ideally what I want to have.... Now many have commented the need to modify the section : "require verify = sender" , but in this version of cpanel there is none... I have attached the exim.conf file for your review...

Motorola Xoom :: Authentication Methods Not Supported By Server forums.motorola.com

I'm trying to setup a pop3 email account and have run into a problem.I can connect to the pop3 server okay but when it tries to connect to the smtp server I get the error message "authentication methods not supported by server".I am using a 3G/Wi-Fi Xoom running 3.2 and using the stock email client.I am using the same settings as my laptop and desktop. Port 25, no security.I have seen this problem reported on the internet a number of times but have not found a solution.

Send Email Using GMail SMTP Server From Page? stackoverflow.com

I am trying to send an email via GMail's SMTP server from a PHP page but I get this error: authentication failure [SMTP: SMTP server does no support authentication (code: 250, response: mx.google.com at your service, [] SIZE 35651584 8BITMIME STARTTLS ENHANCEDSTATUSCODES PIPELINING)] Here is my code: <?php require_once "Mail.php"; $from = "Sandra Sender <sender@example.com>"; $to = "Ramona Recipient <ramona@microsoft.com>"; $subject = "Hi!"; [Code].....

General :: Android Mail App That Allows 2 SMTP Servers? forums.androidcentral.com

I got a Samsung Galaxy S4 last week. My home internet provider (Bell Aliant) seemingly does not allow SMTP relays from my wireless provider Koodo (Telus). Outgoing email does not send when I am not connected to wi-fi. I've seen this problem mentioned several times on the forum but never a 100% solution. iPhone email client allows 2 SMTP servers to be specified. Are there any android email clients that allow this? I have a temporary solution where I have the native email client configured with the Bell Aliant SMTP server and K9 configured with the Telus SMTP server. I receive email to each and send from one or the other based on whether I am connected to wi-fi or not. K9 allows you to configure the account twice but email still comes in twice and each email shows up twice in the combined inbox

Nokia :: E61 And Email - Receive SMTP Authentication When Send Email discussions.europe.nokia.com

I setup my e mail account. I can receive mail, and that's OK.For sending mail I must force SMTP authentication but I can not find. Only that I find is StartTLS, SSL/TLS and Off (Connection settings - Outgoing e mail - Outgoing mail server).I use officially email client build in E61. How I can force SMTP authentication?

OpenSUSE :: Mutt And Gmail Smtp Relay / Using Mutt From Command Line Getting Error? forums.opensuse.org

I have installed and configured mutt with gmail with no issues, following this documentation.Mutt with Gmail/IMAP [CrunchBang Linux Wiki] I can send emails from mutt, but now I need to send email using scripts.If I try to use mutt from cmd line I have the following error. trst:~ # echo "TESTING MUTT AND GMAIL SMTP RELAY" | mutt -s "url" SSL connection using TLSv1/SSLv3 (RC4-MD5) Interactive SMTP authentication not supported Could not send the message. The OS version: OPEN SUSE 11.3 Server installation (NO-GUI)

Sending Mail Using Smtp Authentication To Send Emails phpbuilder.com

I need some one to help me with sending mail using smtp authentication to send emails in this script. i got this far but i do not know how to setup this to sending mail using smtp authentication to send emails. Or how do i edit this so the top script work together.

Error Msg Reply Doing Winsock.connect www.vbforums.com

hi allI am doing email send with Winsock.The pc is connected to a lan network, and OExpress can send emails, so the smtp server stuff is going.I setup the winsock with.remoteport =25.remotehost ="blaa.smtp.com".LocalPort = 0 .Protocol = sckTCPProtocolThe code works fine on a dialup modem, but on the lan system (using a different smtp address)When I do a winsock.connect and wait for a 220 reply, i get this message from the server:SMTP error to code 200: Recieved: Valid name, no data record of requested type.What does the server error mean?

Smtp Authentication phpbuilder.com

I need some one to help me with sending mail using smtp authentication to send emails in this script. i got this far but i do not know how to setup this to sending mail using smtp authentication to send emails. Or how do i edit this so the top script work together?

CPanel E-mail :: Message Goes Out Through Smarthost But Can't Deliver Locally forums.cpanel.net

We have set up a cpanel box to send outgoing email through our smarthost mx.domain.com (a Mailfoundry appliance that works great for all of our mail servers). Mail flows nicely. However, when sending mail from one email account to another with the same domain, email goes to the smarthost but gets bounced back asking for smtp auth: Please turn on SMTP Authentication in your mail client. mx.domain.com [2xx.1xx.1xx.xx]:34438 is not permitted to relay through this server without authentication.Click to expand...


General :: Cannot Unfreeze Stock Email App forum.xda-developers.com

I had disabled the stock email app when my Samsung Galaxy S II GT-I9100 had Ice Cream Sandwich.I upgraded my phone to official Samsung Jelly Bean while the app was disabled. Now, I have to configure office exchange email and I want to use the stock email app rather 3rd party ones like Touchdown. But, now I can't enable it back Looks like, Samsung won't let users disable the stock email app in Jelly Bean . In Settings-> Application Manager-> All-> Scroll to the end, it says disabled next to Email, when I click on it and get in, there is no enable button, but there is a disable button which is grayed out I also tried some of the apps in the Google Play Store to unfreeze apps. It shows the email app to be frozen. But it requires to be root to unfreeze them. how to unfreeze/re-enable the email app without the following: - rooting the phone - factory reset of the phone How do I get the Samsung Galaxy S II GT I9100 4.1.2 email.apk?

Sending Mail Through A Remote SMTP Server www.mrexcel.com

I've been trying to send emails through an SMTP server in various ways. I've been able to send email using CDO going directly through an SMTP server on my same local network (not requiring a username and password). But now I am trying to send email from my home with the SMTP server I am using that is hosted by some commercial company. I used the code below, which is sponsored by Paul Sadowski: Sub sendMailRemote() 'Sending a text email using authentication against a remote SMTP server Const cdoSendUsingPickup = 1 'Send message using the local SMTP service pickup directory. Const cdoSendUsingPort = 2 'Send the message using the network (SMTP over the network). Const cdoAnonymous = 0 'Do not authenticate Const cdoBasic = 1 'basic (clear-text) authentication Const cdoNTLM = 2 'NTLM.......................

Nokia :: To Cancel Or Delete Old Beta Email Account? discussions.europe.nokia.com

Originally I tried to sign up for the email beta with an email account that required a custom smtp server address (i.e. the email address domain wasn't the same as the smtp server domain name, for cert reasons)I could never complete the setup because of the issues with supporting this type of email setup.I ended up taking another email account and using it as a new email beta account. With the beta tag removed, I'd like to see if I can add the initial failed email address as an additional email on my working account that I setup separately.I can see no way to cancel or delete my old beta account. I also can't find any link for a "support" for the messaging service. The instructions say to go to nokia.com/support, but that seems to be more phone support and such.

IIS Win2003 SMTP Setup www.sitepoint.com

I have win2003 server running IIS hosting an asp website, I am wanting to use CDONTS to send emails. I am no pro and not really sure what I am doing with setting up the server for SMTP. I have installed SMTP Virtual Server but do not know what settings I need or what else I need to setup to get it to work. I have always used hosted space before where it is all setup for me. How do I go about it?

Configuration :: Configuring IIS To Send Email Via Home Adsl Account? forums.asp.net

Working from home on an XP Machine, trying to configure IIS to send emails from Asp.Net via my broadband provider (BT). Relay enabled, so now errors are:The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.7.3 Client was not authenticated Pertinent settings that I can see are (in IIS Default SMTP Virtual Server properties): Access, Authentication (presumably app to IIS): Basic + Integrated Windows (However Basic includes correct BT server smtp.btconnect.com -> suggests this is authentication relevant IIS to BT, not app to IIS) Access, Relay: added Delivery, Outbound Security: (presumably IIS to BT) Basic Authentication UserName: my.btusername@btconnect.com (tried with and without @domain) Password: ***** per my account at Bt Integrated Windows Authentication disabled TLS Encryption NOT selected --- I cannot see any other obvious candidates for authentication. I presume model is Asp.Net App -> IIS (step 1) and IIS -> BT (step 2) I presume Access, Authentication specifies step 1, and Delivery, Outbound Security handles step 2 - though why then does IIS recognise my bt server in step 1?

BB Bold :: How To Set The Smtp Server Name And Port supportforums.blackberry.com

I have two IMAP accounts setup on my Blackberry.When I receive an email on account A, I can reply to that email and it works correctly.When I receive an email on account B, I get an error when I reply.This has something to do with which SMTP server is being used and the port it uses.I need to be able to set the SMTP server for each account separately, but I cannot find anyplace where I can specify the SMTP server or the port.Is there a place to specify the SMTP server and port for an email account?

Plesk 12.x / Windows :: Enable External SMTP Server Settings - Unable To Encode IDN Email Address forum.odin.com

We are trying to use a configure settings for an external SMTP server within Plesk (Windows 2008 R2 Plesk 12) but are receiving the following error message: Error: Unable to encode IDN email address 'username': email address is invalid We are trying to use a username for SMTP authentication as we do not have the option of using an email address with our current SMTP relay provider. Is there any way around this so that we can use a username rather than an email address?

Configuring SMTP Server In IIS? forums.asp.net

I am trying to get the SMTP Server in IIS7 working so I can use the asp:PasswordRecovery component. I have included a screenshot of my SMTP setup in IIS, the SMTP setup in my web.config file, and my asp:PasswordRecovery component code. I have set it up to not require any authentication settings. I basically want to specify whatever email address I want as the "From" attribute (I'm using a series of noreply* addresses for a web app), like the php mail function that lets you put whatever you want in the from argument. What am I missing? Do I need to install anything else? I'm assuming that when people say "you need an SMTP server to send mail", this is what they're talking about. Web.config: [Code].... ASP Code: [Code].... SMTP Setup Screenshot:

BB Software :: Email Setup On 8800? supportforums.blackberry.com

I've updated my BB8800 to the latest v. and now I want to configure the email, but I have not email configuration settings. At the "email setup" in setup wizard there is only a email account with enterprise server and there is no settings to change. My operator doesn't support the mail configuration automatically, so I have to put them by myself (POP, SMTP, etc).

How To Setup Email Client With Eurovps www.webhostingtalk.com

I basically bought a HPS Complete VPS hosting account with EuroVPS and i am having problems setting up an email client as no web mail client comes by default with that plan. I asked the eurovps support team 2-3 times on how to set up MS Outlook as my email client for my domain and they answered the same thing and it's not working. I was wondering,if anyone of you have HSP Complete VPS hosting account with euroVPS and is there anyway to have webmail. As per there documentation,i am using the following: username: user email:user@mydomain.com smtp&pop3: mail.mydomain.com smtp port: 25 pop port: 110 Selected to use authentication for outgoing server and checked the option to use same authentication method as incoming server, Deselected SPA authentication scheme I did everything as per the documentation they sent me but it's not working,

Plesk 11.x / Windows :: Configure Report Emails To Use SMTP Authentication? forum.odin.com

Plesk Panel, 11.0.9, #61, Windows 2008 R2 SP1, x64 PROBLEM: With reports configured to send out to an email address local on the Windows server configured through PLESK, if local relay isn't enabled at on the SmarterMail server, the reports are never delivered. - server is [domainx].com - email to receive reports from PLESK is plesk444@[domainx].com -this email address is able to send and receive internally or externally to and from any client w/ SMTP auth enabled. If SmarterMail is configured with SMTP Authentication Bypass for, we get the scheduled report emails as we should. Without the SMTP Authentication Bypass enabled, none of the clients or administrators get any reports or notifications at all. QUESTION: How can I configure PLESK Panel 11 itself to use that SMTP Authentication to send those reports out? --is there a configuration file or registry value I can add or modify?

Send An Email Via Google Apps Without An Ssl Cert? stackoverflow.com

I'm trying to send email via google apps from my asp.net app and am getting the following exception: {"The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required. Learn more at "} My Web.config has the following values: <system.net> <mailSettings> <smtp from="user@domain.com" deliveryMethod="Network"> <network host="smtp.gmail.com" port="587" userName="user@domain.com" password="password" enableSsl="true"/> </smtp> </mailSettings>

Web Forms :: Sending An Email Via An External SMTP Server? forums.asp.net

I'm working on sending an email via an external SMTP server. i receive this error System.Web.HttpException: The server rejected one or more recipient addresses. The server response was: 553 relaying denied from your location [] (#5.7.1) ---> What i have done: Confirmed that the external smtp can receive smtp requests externally assuming the right authenticationConfirmed that the local server is not being checked firsti have updated the A record for the email server to point to the external servers ip address. My email code is as follows [Code]....

Send An Email In Program? www.vbforums.com

What is the best way to do this? create a form which sends emails. I want to use the System.WebMail class and not MAPI which I've seen on this forum. I also need a SMTP Server if I'm not mistaken and can anyone suggest a good smtp server I can use. Also user authentication when sending an email this must be secure.

Plesk 12.x / Linux :: CentOS 6.6 - Postfix SASL Auth Fail forum.odin.com

I've just setup CentOS 6.6 with Plesk at my Hoster OVH. Now when I want to connect to the smtp server I get following message: Code: SASL LOGIN authentication failed: encryption needed to use mechanism SASL auth is enabled in the main.cf also submission. I connect to tls://smtp.example.com:587 with my email and password.

Warning: Mail() [function.mail]: www.codingforums.com

I am trying to send an email through php using the mail() function but getting the following error: Warning: mail() [function.mail]: SMTP server response: my-server-name-here [my-ip-address-here] is currently not 550-permitted to relay through this server. Perhaps you have not logged into 550-the pop/imap server in the last 30 minutes or do not have SMTP 550 Authentication turned on in your email client.My PHP Code is: <?php $to = 'nobody@example.com' $subject = 'the subject' $message = 'hello' $headers = 'From: webmaster@example.com' . "" . 'Reply-To: webmaster@example.com' . "" . 'X-Mailer: PHP/' . phpversion(); mail($to, $subject, $message, $headers); ?> FYI: I am running this code on windows 2003 server and i can send email using Horde. What I am guessing is I need to add smtp authentication in my php code, so If you can tell me what is the syntax that can help me. how to overcome this problem?

VB + Email + CDONTS www.vbforums.com

I need to be able to send email from my application without any popups like when using Outlook.Application. I tried CDONTS but came to realize that you have to have the SMTP Service running on all machines using my software. Is there a way to use CDONTS but use it from a remote machine and not the local machine? Or can someone help me out in another way. My SMTP Server requires Authentication before SMTP (Third Party Software, Not via SMTP Service MS Provides). Thanks, Jeremy

Plesk 11.x / Linux :: FileShare Email Links Not Working With MSMTP Relay Only Mailserver forum.odin.com

We were using the mailserver on our linux install, but have since changed over to an ms exchange server. With that I removed the mailserver and installed MSMTP relay only mailserver (SMTP client) option. I configured the External SMTP Server settings under Tools & Settings / Mail with a valid email address password host name and port of 587. When I save it says settings saved. Since doing this I have been unable to use the email link option for share files in the file share portion of my domain. When I try to select a user from the list to send the email to or even type an external email all I get is the error "Unable to send email". When I checked the maillog file in /usr/local/psa/var/log, I get this error "Jun 20 15:42:59 u16271698 msmtp: host=smtp.1and1.com tls=off auth=on user=to@email.ca from=psaadm recipients=to@email.ca errormsg='cannot use a secure authentication method' exitcode=EX_UNAVAILABLE" Where I have proper emails configured where I placed "to@email.ca" How can I get this working with the MSMTP relay only mailserver (SMTP client) option installed?

Plesk 11.x / Windows :: Panel Notifications And Email forum.odin.com

I have Plesk and SmarterMail running on a server.SmarterMail is setup as 'require SMTP authentication before relaying' email (I think this is standard practice).I cannot get Plesk to send any emails, such as forgotten password reminders and notifications.Plesk tries to send but gets a "550 Authentication is required for relay" error... which is expected, because I can't find anywhere in Plesk to enter the authentication details for the email account being used to send (relay) the emails. I don't want to setup a 'whitelist' or 'bypass relay authentication' for as I have had a spam issue with this previously.where to enter the username / password details so Plesk Panel can authenticate and send it's emails?

Security :: Configure Gmail SMTP Server To Send Mail? forums.asp.net

I'm using forgot password wizard and I configure my smtp like this: and the SMTP server: smtp.gmail.com (use authentication) Use Authentication: Yes Use STARTTLS: Yes (some clients call this SSL) Port: 465 or 587 [Code].... but, the error: The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.7.0 Must issue a STARTTLS command first. 23sm5887003pzk.8

Send Mail From Localhost? www.dreamincode.net

iam trying to send an email using PHP, but my problem is that i dont have any smtp server, and iam just working in my localhost, though i have internet connection. I heard that a mail can be sent from localhost. how to send an email in localhost? I tried giving my ISP provider's smtp address in php.ini file, but then i got some authentication problem. Is there any other way, or shall i use a free smtp server ?

CPanel E-mail :: Send Mail With In Bash Script With SMTP AUTH forums.cpanel.net

As in the title I need to send email (with log report, etc..) within a bash script executed by a cronjob.As I set in my WHM this two things (Mod security): The pseudo-user “nobody” is not permitted to send email.Outbound SMTP connections are restricted.I can't send email without SMTP authentication (I think).I need to authenticate in an external server (onother WHM&cPanel).How should I write this bash script?Up to now my script is: Code: #!/bin/bash DATA=`date +%H` FILE="/home/path/to/file/file.txt" USER="domaincom" DOMINIO="domain.com" TO="myuser@domain1.it" FROM="cpanel" SUBJECT="email from cP" [code]...

Sending Mails Without SMTP Authentication On Exim www.webhostingtalk.com

I have a customer that wants to send emails using Exim and SMTP (using outlook), withouth authentication. Now.. the big question is ... how can I configure the Exim server to work withouth any authentication? I know the risks of this withouth any authentication, but is my customer's server and he want to work in this way. He is also asking if he is able to send emails withouth authentication using SMTP for certain IP addresses.. is that possible? Can be done for only 1 domain, or for the entire server? Im using Exim 4.6.8 and RHE 4 + cPanel.

CPanel E-mail :: How To Block Outgoing Un-authenticated Emails forums.cpanel.net

Regularly clients use old exploitable code which causes holes in their applications that eventually gets used by hackers to install malicious code. Most of the time this code is being used to send spam from our servers. We have no control over our clients code, so patching the holes is quite impossible.We use suPHP / suEXEC on all cPanel servers. Turning on "prevent nobody from sending emails" doesn't work. Every decent PHP script / app has options to use SMTP Authentication. So we can inform users to switch to smtp authentication and send emails from an authenticated user who they created. how I could possibly stop any other ways to block outgoing spam mails ?I've seen malware scripts that they are using just mail() function, I've seen scripts obfuscated I don't even know what they use, anyway all of the spam is coming out NOT using smtp authentication (obviously) so how I can stop anything else except SMTP ?

After Use Remote Mail Server , Old Box Got Queued Up By Mails www.webhostingtalk.com

We change mail server, so the old box is now dedicated for web hosting, but since web site and cp system still sending emails out, it seems that unix php cannot support remote smtp by setting php.ini, after we changed mail server, our email queue from 100 goes up to 1500 in a day with our outgoing emails. I have to deliver them manually one by one it seems, but still some of them cannot being deleveried. New mail server has setup with ptr to mail.ourdomain.com. Can anyone got idea about it?

Samsung Behold 2 :: How To Set Up Vpn On Bh2? androidforums.com

lmao i found a site that teaches you how to set up vpn on bh2 and it says bh2 has 2.1 How to set up VPN on the Samsung Behold II - Know Your Cell"The Samsung Behold II with Android 2.1 includes support for Virtual Private Network (VPN) connectivity. Here we show you, step by step, how to setup a VPN connection."

General :: IMAP Emails Not Deleting? forums.androidcentral.com

I just traded in my webOS Veer for a giant of a phone - the Samsung Galaxy SII. I have a typical IMAP mail box setup (non gmail). Most everything works fine. However, when I delete emails using the Galaxy, they don't actually delete. In the next sync, they pop right back up. I guess I was a little spoiled by how well webOS handled the setup of all my email accounts, so hopefully I am just overlooking something obvious.

General :: How To Open A File In Terminal Emulator - Samsung Galaxy S II forums.androidcentral.com

Just got Samsung Galaxy S II and I'm trying to open a file in terminal emulator for android. The file is named 'setup.sh'. When I type 'sh setup.sh' in terminal, it writes back 'Can't open setup.sh' The file is saved on the phone. How to open it?

Send Emails Using PhpMailer And GMail SMTP? stackoverflow.com

I am attempting to send emails using phpMailer and GMail SMTP. It works fine sending emails to other Gmail accounts but sending to Yahoo the mail never gets there. I read about debugging using ip addresses and such, but I am not skilled in that area? here is the code: $mail->Mailer='smtp'; try { $mail->SMTPAuth = true; // enable SMTP authentication $mail->SMTPSecure = "tls"; // sets the prefix to the servier $mail->Host = "smtp.gmail.com"; // sets GMAIL as the SMTP server $mail->Port = 587; // set the SMTP port for the GMAIL server $mail->Username = "__email__"; // GMAIL username [Code]... update: Found the problem: Our server had been blacklisted by Yahoo (not my fault) so that's a day-and-a-half wasted.

HTC Desire :: Sending Emails From Talktalk Account? androidforums.com

I'm having trouble sending emails from my talktalk account. When I type outgoing server smtp.talktalk.net I get the message that my server does not support authentication.

SMTP Server Response: 503 This Mail Server Requires Authentication www.phpfreaks.com

I get this any time I try to send an email to someone that IS NOT in the domain of the company: Warning: mail() [function.mail]: SMTP server response: 503 This mail server requires authentication when attempting to send to a non-local e-mail address. Please check your mail client settings or contact your administrator to verify that the domain or address is defined for this server. in corpevent.php on line 21 I have it setup like this (I removed the email address domain...but its correct in the code): // INI Settings // ini_set(sendmail_from,"info@domain.com"); ini_set(SMTP,"mail.domain.com"); ini_set(smtp_port,"25"); $headers  = "MIME-Version: 1.0"; $headers .= "Content-type: text/html; charset=iso-8859-1"; $headers .= "From: info@domain.com"; $to = $_POST['txtEmail']; mail($to,"Your Email",$theEmail,$headers); Why am I not allowed to send an email to anyone that doesn't have a "domain.com" at the end of the email?

Php5 - Mailing Check Whether Serer Needs Authentication Or Not ? stackoverflow.com

As we know it is possible to send emails using php mail() function. but in some servers it requires SMTP authentication (ie we have to provide an email address and password). How can I determine through a PHP script that the server require authentication or not.

CPanel E-mail :: Removing Non-SSL Connection Settings When PCI Compliant forums.cpanel.net

Obviously, when attempting to be PCI Compliant, a part of that is to ensure that the SMTP server is only accessible via SSL. Now that I have set this, I have clients complaining that they receive errors on their mobile devices stating "Server does not support authentication" when attempting to connect without SSL. Any way to remove the Non-SSL settings from the "Configure Email Client" page in cPanel? This will obviously remove any confusion to my clients and yours if you are also achieving PCI Compliancy.

OpenSUSE :: SMTP Server Doesn't Support Authentication? forums.opensuse.org

I just dowm loaded and installed 11.3 openSuse I set up Kmail but when I tried to send it says Your SMTP server does not support authentication. The server responded: "5.5.1 command unrecognized" The message will stay in the 'outbox' folder until you either fix the problem (e.g. a broken address) or remove the message from the 'outbox' folder. The following transport was used: Charter.net I did set up the email correctl

Unable To Send An Email From .net Using A Google Apps Email? stackoverflow.com

I am trying to send an email from asp.net using a google apps email. I found this question which did not resolve the issue Send Email via C# through Google Apps account The part that I am really confused about is that it works with these settings <smtp from="****@gmail.com" deliveryMethod="Network"> <network host="smtp.gmail.com" port="587" userName="****@gmail.com" password="****"[code].... and get the following error message "The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required." I found this article as well http://www.google.com/support/forum/p/Google+Apps/thread?tid=2cbb54572fea6939&hl=en and worked through this but that did not resolve me issue either.

I7500 :: Samsung No Longer Supporting Android On Galaxy androidforums.com

O2 forum has launched a Poll regarding the Galaxy i7500, pls cast your vote O2 Forum :: View topic - Samsung no longer supporting Android on Galaxy

How To Send An Email Using Authenticate Smtp Server With Port Number forums.asp.net

i want to send an email using authenticate smtp server with port number(For Example SMTP Server is : and port : 587). i got lots of example but failed to find smtp server with port number using authentication.

Unable To Send Email / User Name Or Password Incorrect discussions.apple.com

I have had this same issue on the iPhone for a few years and now have it on the iPad. I have setup my personal account and can successfully receive email. However, sending email is problematic as it always incurs the error: Cannot Send Mail The user name or password for "SMTP:<my email address>@<ISP's SMTP server>" is incorrect. The user name for my email account is my email address (name@domainname.com) and the SMTP server is of the normal form mail.isps_domainname.com. The error message suggests that Apple's mail utility is joining the username with the SMTP address with the @ being the conjunction. If it is doing this, it is wrong as it is screwing up the user name. Is there anyway to stop the Mail utility from doing this? Information: iPad iOS 4

Mail() And SMTP Authentication phpbuilder.com

It would seem BT Internet have just turned on SMTP mail authentication although they have been talking about it for years as I now get the following error message using the mail function on my local machine which worked fine a couple of weeks ago. Warning: mail() [function.mail]: SMTP server response: 530 authentication required - Your email could not be sent. To fix this you must make a simple change to your email (known as SMTP authentication). For advice visit www.btyahoo.com/smtp or call 0800 328 9968 Needless to say "Advice" relates to Outlook Express and little else, certainly not PHP. Anyone know the changes I need to make and where, parameters for the mail() function or in the php.ini file perhaps. Naturally I know the information relating to mail username and password.

What The Erorr On This Photo www.vbforums.com

look at this photothis is codeCode:' This Visual Basic example program sends mail with' a GIF file attachment.Private Sub SendMail_Click() ' Create a MailMan instance to send email Dim mailman As New ChilkatMailMan2 ' Unlock the email component mailman.UnlockComponent "UnlockCode" ' Change this to your SMTP server. ' Depending on your SMTP server, you may not need ' the SMTP login or SMTP password. mailman.SmtpHost = "smtp.earthlink.net" mailman.SmtpUsername = "MYUSERNAME" mailman.SmtpPassword = "MYPASSWORD" ' Create an email for sending Dim email As New ChilkatEmail2 ' Set the email subject and body email.Subject = "test" email.Body = "this is a test" & vbCrLf & "line 2" & vbCrLf & "-Bill" email.AddTo "John Doe", "john@chilkatsoft.com" email.FromAddress = "bill@chilkatsoft.com" email.FromName = "Bill Doe" ' Add a file attachment to the mail. email.AddFileAttachment "dude.gif" ' Send mail. Returns 1 if successful, 0 if failed. success = mailman.SendEmail(email) If (success = 0) Then MsgBox mailman.LastErrorText End If End Sub

CPanel E-mail :: Server Configuration Is Wrong forums.cpanel.net

I just finished configuring my server with host name wtgot.domain.com and added primary website for this server of domain.com. When logging into cPanel and adding email in which I did. I then clicked on more then chose configure mail client. I used the configuration that is shown below in red to enter in outlook. The setting provided failed during email setup in outlook. I then decided to try the other option not recomended for email configuration in which was not ssl (shown in blue below. This worked. I then noticed that second option showed mail.domain.com as setting. I then went back and did first option and changed setting to wtgot.domain.com to mail.domain.com and that worked.How do correct first options settings in cPanel so that my clients are seeing the correct settings; otherwise I will be getting allot of support tickets. First Option Secure SSL/TLS Settings (Recommended) Username: admin@domain.com Password: Use the email account’s password. Incoming Server: wtgot.domain.com IMAP Port: 993 POP3 Port: 995 Outgoing Server: wtgot.domain.com SMTP Port: 465 Authentication is required for IMAP, POP3, and SMTP. Second Option Non-SSL Settings (NOT Recommended) Username: admin@domain.com Password: Use the email account’s password. Incoming Server: mail.domain.com IMAP Port: 143 POP3 Port: 110 Outgoing Server: mail.domain.com SMTP Port: 25 Authentication is required for IMAP, POP3, and SMTP

Ubuntu Servers :: Sending Mail To External Email (Outside LAN) ubuntuforums.org

I just setup a mail server on my web server and I cannot for the life of me figure out how to send emails to external (as in outside my LAN) emails or receive from external emails. I'm using Postfix with Dovecot and Squirrelmail. I get this delivery report in Squirrelmail when trying to send an email to my hotmail address. Final-Recipient: rfc822; example@hotmail.com Action: failed Status: 5.0.0 Remote-MTA: dns; mx3.hotmail.com Diagnostic-Code: smtp; 550 DY-001 Mail rejected by Windows Live Hotmail for policy reasons. We generally do not accept email from dynamic IP's as they are not typically used to deliver unauthenticated SMTP e-mail to an Internet mail server. [URL] maintains lists of dynamic and residential IP addresses. If you are not an email/network admin please contact your E-mail/Internet Service Provider for help. Email/network admins, please visit [URL] for email delivery information and support.

Cannot Receive EMAIL www.webhostingtalk.com

I've got the folowing error message: Technical details of permanent failure: PERM_FAILURE: SMTP Error (state 9): 550-wr-out-0506.google.com [] is currently not permitted to relay 550-through this server. Perhaps you have not logged into the pop/imap server 550-in the last 30 minutes or do not have SMTP Authentication turned on in your 550 email client. I am using Exim.

Ubuntu :: Unable To Send Gmail From Evolution? www.linuxforums.org

I have configured Evolution to use my Gmail account. I am able to read my Gmail, but I have not been able to send email. I have found instructions to do this from several sources, which include the Gmail website and Ubuntu help at HTML Code: [URL]. The instructions from all sources have been consistent: Instructions for Sending(smtp) Mail from Gmail: 1. Server: smtp.gmail.com Note: Some ISPs block port 25, if you are having a problem sending mail, substitute smtp.gmail.com:587 for the server information above. 2. Server requires authentication: Checked 3. Security: TLS encryption 4. Authentication: Plain or Login 5. Username: johndoe@gmail.com I have also tried using port 587 and 465 as alternates. When I try to send an email, there appears to be two stages: it successfully completes the first stage that refers to POP, but gets stuck on the second stage that refers to SMTP.

HTC Desire :: POP Mail Setup / SMTP Username Change? androidforums.com

I have setup and tested my personal email on my new HTC Desire and all seems fine, then when I get home and manually check my email on my Outlook client I seem to have received about 4 emails but none to my phone. When I go into my settings on my phone, the SMTP server settings for mail have changed. For example when I set it up it should be say: POP Server: mail.neilsdomain.com POP Username: neil@neilsdomain.com SMTP Server: smtp.ispname.co.uk SMTP Username: neil@ispname.co.uk I test this and all works wonderfully and mail flows into my phone. Then for some unknown reason when I come out and go back in the SMTP settings have changed by themselves to: SMTP Server: smtp.ispname.co.uk SMTP Username: neil@neilsdomain.com. Why would the SMTP Username change?

Gorilla Glass Vs Ipad 2 Glass? www.ipadforums.net

Is Gorilla glass really that strong? I saw some vid's where people were dropping coins, drill, nuts and bolts on the glass and nothing happened. Is is really that strong? Why wouldn't Apple go with it other than maybe it heavy.I was researching and found this they all use that glass Samsung: Behold II, Captivate, Continuum, Corby S3650, Corby W900, Epic 4G, Fascinate, Flight II, Focus, Galaxy A, Galaxy Ace, Galaxy S, GALAXY S II, Galaxy S 4G, Galaxy Tab, Galaxy Tab 10.1, Lindy, Mesmerize, Monte, Monte Preston, Omnia HD, S8500 WAVE, Showcase, Trance, Transform, Ultra TOUCH S8300, Vibrant, Wave II?

Sending Email Outside Of Network Fails? forums.asp.net

I have asp.net page that sends email fine locally.Mail server (MS exchange server) is located in network and I can send email to my domain email address.ie. server name: smtp.mysite.net and I can send email to bob@mysite.netHowever, I can't send email to Gmail or Yahoo etc, and get error message as followError Occured, infor=The SMTP server requires a secure connection or the client was not authenticated. The server response was: SMTP authentication is required.I googled and found code to add, but still not sending. Dim SmtpUser As New System.Net.NetworkCredential() SmtpUser.UserName = "" SmtpUser.Password = "" [code]...

Xperia Pro/Neo/V/L :: Add Birthday Dates In Google Contacts On Neo V? talk.sonymobile.com

Some time back I had synchronised all my contacts to google contacts.There ws provision for adding email,etc but dere ws no provision of adding birthdays.When i accessed my contacts through my gmail,i cud easily add bday,,,but since dere ws no provision of bdays on my Neo V,,the changes could not be reflected back on my phone.I tried dis on other samsung phones like samsung galaxy R,samsung galaxy S2 n samsung galaxy Note.In all dere ws a provision of adding bdays to gmail contacts through phone itself.Then y Sony is missing on dis.

Nokia :: E75 / Yahoo Mail Setup discussions.europe.nokia.com

I've been able to setup/sync gmail on the E75, but I've had no luck with yahoo. can anyone help? I'm using the following server/port settings for use by yahoo plus accounts:Server Settings Incoming Mail Server (POP3): plus.pop.mail.yahoo.com Use SSL, port: 995 Outgoing Mail Server (SMTP): plus.smtp.mail.yahoo.com Use SSL, port: 465, use authentication.If anyone has any clues for yahoo accts, please help.

CPanel E-mail :: WHM - Turn On SMTP Authentication In Mail Client forums.cpanel.net

We have a WHM / cPanel server that has about 60 clients on it and over the past several months we noticed that some people are reporting problems with people e-mailing them and that the external people get message like the following: ourserverhostname.com gave this error: Please turn on SMTP Authentication in your mail client, or login to the IMAP/POP3 server before sending your message. externalhostname.com[ip address]:3424 is not permitted to relay through this server without authentication. This occurs when someone tries to email one of our customers that is set-up on our server.

Ubuntu Servers :: SMTP 554 5.7.1 : Relay Access Denied ubuntuforums.org

I have setup my own home server . All the applications are working perfectly except one I can't send Emails. I check weda my smtp has any errors not welll I got this Code: SMTP -> FROM SERVER: 220 server1.example.com ESMTP Postfix (Ubuntu) SMTP -> FROM SERVER: [code]....

Web Forms :: Email Error On Web Form: Mailbox Unavailable forums.asp.net

Everytime I submit a form I created I wanted it to send a confirmation email but I get the error below instead: The error occurred sending your confirmation email: Mailbox unavailable. The server response was: Authentication is required for relay. What am I doing wrong. In my web config I have the name of the smtp server. I tried changing it to localhost and that didn't work.

How Can I Set PHP To Send Email Through SMTP? forums.devshed.com

I'm gonna setup a page where i can send email to anybody as an anonymous user. it's just for education purposes keep in mind. I already have made a form which tries to email using the action mailto:myemailaddress@whatever.com but if that person sending uses Hotmail on Linux, that simply does not work. how do i change this form to make it work with PHP? -i know my ISP's SMTP server (my Linux didn't come with sendmail for some stupid reason) -the SMTP server does NOT require a name or password

OpenSUSE :: Evolution Mail Client Gmail Smtp Setup forums.opensuse.org

I have the 11.4 Gnome Distribution.everything is setup except my email sending.I have never been able to setup evolution correctly with gmail.I have followed the gmail settings of setting the smtp server to be smtp. gmail. com:465 and folowed the instructions here Evolution/FAQ - GNOME Live!to setup smtp.gmail.com with no port change.if there is no port specified the sending message window doesn't report an error it just hangs.